Results 1 to 6 of 6
Thread: I have a few Questions
-
06-18-2005, 01:23 AM #1
Regular Guest
- Join Date
- Jun 2005
- Posts
- 17
OK, what is the feeling on adding a seperate attic a/c system vs. in the duct work that supplies the heat? I'm sorry if I ask some of the same ques. trying to come up with the best system...
Again would the 4 inch supplies for the heat be ok? Or should they be upgraded as well?
Just want to finish
Thanks, glad I found this site......
-
06-18-2005, 01:32 AM #2
Professional Member
- Join Date
- Jan 2003
- Posts
- 948
hey
Depends on size of room you are tring to heat..
Give room size and how many rooms?
regards,
Kelvin
-
06-18-2005, 01:57 AM #3
Regular Guest
- Join Date
- Jun 2005
- Posts
- 17
This is for an entire house. at this time ther is a 85000 btu unit forced ait oil...
-
06-18-2005, 03:38 AM #4
Regular Guest
- Join Date
- Sep 2004
- Posts
- 3,157
what was the result of your load calculations? 4 inch supplys would be great if you are heating a dog house
isd this a do it yourself project or is your contractor unable to answer your questions?
-
06-18-2005, 07:22 AM #5
Professional Member*
- Join Date
- Nov 2004
- Location
- SW FL
- Posts
- 5,255
4 "
that Dog house would have to be VERY Small though.Originally posted by ct2
... 4 inch supplys would be great if you are heating a dog house ...Designer Dan
It's Not Rocket Science, But It is SCIENCE with "Some Art".
Define the Building Envelope and Perform a Detailed Load Calc: It's ALL About Windows and Make-up Air Requirements. Know Your Equipment Capabilities
-
06-18-2005, 08:57 AM #6
Global Moderator
- Join Date
- Jan 2004
- Location
- Lancaster PA
- Posts
- 62,184
Though we already answered this question in your other post.
New duct work for the furnace, and the a/c installed with it.
Reply With Quote
