Gas and go...why call the boss...
Get the one with the ball valve. I don't have the one with the t on it for the pull down...Does it save time? Here is a link http://www.yellowjacket.com/PDF/LCD_Vac_Gauge.pdf
[Edited by nc hvacman on 06-18-2005 at 07:35 PM]
Gas and go...why call the boss...
recover and evacuate and virgin refrigerant just to replace schrader cores seems a little unfair to the coustomer. why not pull it back and lock it down change the cores evauate and release the same refrigerant back into the system then ajust the charge from there. best yet a removal tool 2 minutes and you can change both valves and be on your way.
If you know the pumpdown method that definitely would be the way to go if you don't have the Valve Core Removal Tool- I always wondered who invented the valve core removal tool that doesn't lose the charge and lets you change the core. I suspect whomever did is sitting pretty now.
Tin: i wont say anything about your memory if you edit your post and put a period in front of that 4 oz figure.
do you know how much 4 ounces can cost a guy these days?
That static regain connection causes people some fits on those little air handlers.Originally posted by karsthuntr
If you have units that need a different charge for Heat and cool than there is something wrong. All Rheem/Ruud have accumalators on there HP's.Originally posted by bornriding
Excuse me if I am off base here, but is this a heat pump and does it have an accumulator?? If it is a HP and no accum. then it may just have to be charged differently for heat & cool. Probably a Rheem or Rhuud ???
When I find this problem it is usually because the airflow is not correct.
For some reason Rheem/Ruud has a bad rep because it is not very forgiving. Most of the time the install instuctions were not followed and it's an install error.
Have you set up a Google alert for Carbon Monoxide yet?
Click here to find out how.
Originally posted by davidr
That static regain connection causes people some fits on those little air handlers.Originally posted by karsthuntr
If you have units that need a different charge for Heat and cool than there is something wrong. All Rheem/Ruud have accumalators on there HP's.Originally posted by bornriding
Excuse me if I am off base here, but is this a heat pump and does it have an accumulator?? If it is a HP and no accum. then it may just have to be charged differently for heat & cool. Probably a Rheem or Rhuud ???
When I find this problem it is usually because the airflow is not correct.
For some reason Rheem/Ruud has a bad rep because it is not very forgiving. Most of the time the install instuctions were not followed and it's an install error.
Or lack of.