2 wires on old stat, have honeywell rth7500d
Results 1 to 5 of 5

Hybrid View

  1. #1
    Join Date
    Jun 2005
    Posts
    2

    Hmm

    I recently purchased a Honeywell RTH7500d off of ebay so when i moved into my newly purchased house that I could so some energy saving changes.

    I went tonight to install new t-stat but noticed when i removed the old Lennox one from the wall taht there is only 2 wires, white & black, and the instructions for the new t-stat mentions nothing about them. Did some searhing on the net but found a lack of required information to install to this system. Please help!

  2. #2

    for heat only

    If its for heat only then run the wires to w and r..




  3. #3
    Join Date
    Jun 2005
    Posts
    2
    does it matter which colour wire goes to which connection?

  4. #4

    nope

    no it does not.. If you are using only two wires.. NOw if there were more then it would matter.

    regards,
    kelvin

  5. #5
    Join Date
    May 2005
    Location
    Calgary, Alberta, Canada
    Posts
    92
    Unless it is a power stealing thermostat then it does not matter.


    -websy
    Yes we have air conditioning in our igloos.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event