Results 1 to 4 of 4

Thread: PVC MOJO

Hybrid View

  1. #1
    Join Date
    Jun 2003
    Location
    GA
    Posts
    395

    Question

    My PVC MOJO's not as good as I'd like.

    What am I looking at on the left of this 90? Is that 2nd HX condensate leaving from the blower compartment area and going down to a floor drain? Is that an air break just above it or a caped clean out? Where is that clear tube going up out of the pic? I see a second PVC tight to the cabent tapping near the bottem of the cabent. Wait a min, that would be the 2nd HX, no?

    Sorry that pics as good a view as I have on this VHS tape.



  2. #2
    Join Date
    Jun 2003
    Location
    GA
    Posts
    395

    Cool

    anybody?

  3. #3
    Join Date
    Mar 2002
    Location
    Concord, CA
    Posts
    2,635
    I have a feeling this is a trick question. But I'll play along for the moment.

    The clear tube looks like the same tubing used on condensate pumps. Since it's coming from higher than the pictured equipment I have to assume it's from another system entirely. Immediately to the right of that is a vent. Presumably they put it there to vent after the furnace's internal p-trap. And of course the PVC appears to go into the furnace to drain the condensate from heater operation.

    Troubleshooting by closed circuit televsion are we?

  4. #4
    Join Date
    Jun 2003
    Location
    GA
    Posts
    395

    Talking No tricks

    No tricks.

    T-shoot by CCTV, yes. It's the new thing, I thought you knew. LOL


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event