Results 1 to 7 of 7
  1. #1
    Join Date
    Dec 2002
    Posts
    9
    Hi all, I'm in need of the motor size and speed of a unit that I'm going to replace tomorrow. It's a MAgic Chef
    G7A75DC10-9 Any Help would be greatly appreciated.

  2. #2
    Join Date
    Jun 2001
    Posts
    3,917
    Did you already find one online?

  3. #3
    Join Date
    Dec 2002
    Posts
    9
    I was looking and it looks like I have three choices but cant find one for the model # I have. It looks like either 1/3 or 1/4 1075rpm at 208/230. Does this sound right

  4. #4
    Join Date
    Jun 2001
    Posts
    3,917
    Well golly Wally this isn't a DIY site. Happy hunting.

  5. #5

    1/3 motor

    Its a 1/3 motor.. 75,000 btu with a 3 ton blower

  6. #6
    Join Date
    Dec 2002
    Posts
    9
    This is a 208/230 voltage correct? I'm not a do it yourselfer I'm in Tech School and didn't pull the motor out. I'm trying to make this my future. Thanks for the help
    !

  7. #7
    If this is a furnace we are talking about.. its 120 volts.
    If its a conderser unit then 220 volts

    regards,
    kelvin

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event