Please help out a noob here. I have a two year old WaterFurnace system with closed loop vertical well system.
The problem I have is that the WaterFurnace keeps kicking off with a "Water Flow" error. The loops appear to be frosted over. The contractor was out last week and measured the loop temps at 29 F in and 25 F out. He blames the problem on a "cold loop". A different company drilled the wells and he had me pay them separately. That company has now changed ownership and they say "90 day warranty only".
I have 6 wells in my yard. 4 of them are 150' deep, the 5th is 100' and the 6th is 50'. Wells 5 and 6 are tied together in one loop. They all go to a manifold in and out. The depths are not exact, but he said they were close enough.
I do not understand fluid dynamics, but I suspect the water will go the path of least resistance... which is probably the loop 5 and 6 route but I don't really know.
I suppose my only option is to dig up the yard and figure out what's going on, but that is going to be a major problem. I know where the manifolds are and wonder what would be wrong with making it all into one long single loop? That way I'm assured that all the water goes the entire loop.
Can someone please take the time to explain this to me? Any help is greatly appreciated!!!!!