I have a 2 story house on a single Lennox unit. I am experiencing the typical "hotter upstairs than down stairs" syndrome. I am considering installing a Lennox LZP-2 zone system to divide the upstairs and downstairs into 2 zones. My unit is a split system heat pump with easy walk-in access to the air handler and trunk ducting. There are two trunk lines; one for upstairs and one for downstairs already. Anyone have a ballpark idea of what this would cost?
How DEEP are your Pocket$? Based on today's Memorial Day $ale, Joe $muck will do it fer <$4.3210K
However, all contracts for this sale must be received by 5/29/05 11:59AM & ALL Sales are Final.
Have a Plea$ant MEm OR Ial Day!
Designer Dan
It's Not Rocket Science, But It is SCIENCE with "Some Art". ___ ___ K EEP I T S IMPLE & S INCERE
Define the Building Envelope and Perform a Detailed Load Calc: It's ALL About Windows and Make-up Air Requirements. Know Your Equipment Capabilities
what ever the price it would make a big difference in comfort. with ducts already split it should be a piece of cake to install dampers and wire up controls.
I have the exact smae situation and have a honeywell EMM-3U controller ready to go in. I have a 12" for the upstairs and 2 10" for the downstairs.
The upstairs is easy- one thermo- one damper. But how should I hook up the downstairs?
1. Both dampers run off of one zone connection (possible overload?)
2. OR wire the downstairs thermostat to the controller so that it looks like 2 thermostats running exactly the same mode all the time. then it would control 2 dampers on their own connections.
Thanks in advance-
Any damper recommendations are VERY welcome, also.
Reply With Quote
E$timating de Zone
