Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2006
    Posts
    2,607

    Securing Wire to a Stud

    I needed to secure wire to a stud in a control panel, I didn't have enough threads to put a ring wire tie on it. I used a #10 ring terminal on the stud, pulled the insulator off, and threaded the wire tie thru the Crimp barrel. I could even bend the ring terminal to keep the wire off of the sharp edges in the panel.

  2. #2
    Join Date
    Aug 2007
    Location
    Western Colorado
    Posts
    497
    Good tip! Thanks!
    RealEyes
    Realize
    RealLies!




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event