ReplyStart with this at your supply house.
50DK406752
Regular Guest
I have a few units that have the old slide econonizers. I called carrier to order the drive screw that connects to the motor and moves the damper up or down. Carrier can not find a part number. Does anyone have a part number for the drive screw? The carrier unit model is 48djd008-series--601.
The ecomonizers tag has it to be a 50dk300339a.
Thanks
Professional Member*
Start with this at your supply house.
50DK406752
New Guest
I had the same issue at one of my accounts. I gave all the info to our parts guy and he informed me that we could get the parts but it would actually be cheaper for the customer to replace the entire economizer. Carrier has a new design which consist of plastic gears on each end of the dampers. Very easy replacemant. Look into this, Carrier has a tendency to make things obsolete that aren,t that old.
Professional Member
+1, my carrier rep literally told me I would have to change the whole assembly when all I had wrong was an end switchOriginally Posted by gobrowns
New Guest
This is the Ask Our Pro's forum. In order to post a response here, you must have verified qualifications and have been approved by the AOP Committee. You may ask a question by starting a new thread.
You can find the rules for posting and qualifications here.
Additional infractions may result in loss of posting privileges.
Last edited by jpsmith1cm; 10-25-2012 at 08:50 PM. Reason: non AOP member
Professional Member
npeterson
This is the Ask Our Pro's forum. In order to post a response here, you must have verified qualifications and have been approved by the AOP Committee. You may ask a question by starting a new thread.
You can find the rules for posting and qualifications here.
Additional infractions may result in loss of posting privileges.
Posting Permissions