Results 1 to 6 of 6
  1. 02-25-2011, 08:46 AM #1
    fac 213
    fac 213 is offline Regular Guest
    Join Date
    Nov 2006
    Location
    New Jersey
    Posts
    44

    Carrier varislide ecomonizers

    I have a few units that have the old slide econonizers. I called carrier to order the drive screw that connects to the motor and moves the damper up or down. Carrier can not find a part number. Does anyone have a part number for the drive screw? The carrier unit model is 48djd008-series--601.
    The ecomonizers tag has it to be a 50dk300339a.

    Thanks
  2. 02-25-2011, 09:45 AM #2
    Dallas Duster
    Dallas Duster is offline Professional Member*
    Join Date
    Jan 2008
    Location
    Dallas ,Texas
    Posts
    3,510
    Start with this at your supply house.

    50DK406752
    UA 100

    It takes three people to do anything around here. Two do the work, one explains to the crowd of people who showed up when they seen smoke and flames.
  3. 02-27-2011, 09:40 PM #3
    gobrowns
    gobrowns is offline New Guest
    Join Date
    Feb 2011
    Posts
    4
    I had the same issue at one of my accounts. I gave all the info to our parts guy and he informed me that we could get the parts but it would actually be cheaper for the customer to replace the entire economizer. Carrier has a new design which consist of plastic gears on each end of the dampers. Very easy replacemant. Look into this, Carrier has a tendency to make things obsolete that aren,t that old.
  4. 02-27-2011, 10:09 PM #4
    929rc51
    929rc51 is offline Professional Member
    Join Date
    Dec 2009
    Posts
    66
    Quote Originally Posted by gobrowns View Post
    I had the same issue at one of my accounts. I gave all the info to our parts guy and he informed me that we could get the parts but it would actually be cheaper for the customer to replace the entire economizer. Carrier has a new design which consist of plastic gears on each end of the dampers. Very easy replacemant. Look into this, Carrier has a tendency to make things obsolete that aren,t that old.
    +1, my carrier rep literally told me I would have to change the whole assembly when all I had wrong was an end switch
  5. 10-25-2012, 12:24 PM #5
    npeterson
    npeterson is offline New Guest
    Join Date
    Jul 2012
    Location
    Nampa, ID
    Posts
    5
    This is the Ask Our Pro's forum. In order to post a response here, you must have verified qualifications and have been approved by the AOP Committee. You may ask a question by starting a new thread.

    You can find the rules for posting and qualifications here.

    Additional infractions may result in loss of posting privileges.
    Last edited by jpsmith1cm; 10-25-2012 at 08:50 PM. Reason: non AOP member
  6. 10-25-2012, 08:50 PM #6
    jpsmith1cm's Avatar
    jpsmith1cm
    jpsmith1cm is offline Global Moderator/AOP Committee
    Join Date
    Sep 2008
    Location
    Western PA
    Posts
    20,944
    npeterson


    This is the Ask Our Pro's forum. In order to post a response here, you must have verified qualifications and have been approved by the AOP Committee. You may ask a question by starting a new thread.

    You can find the rules for posting and qualifications here.

    Additional infractions may result in loss of posting privileges.
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules