Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2002
    Posts
    9
    Just wondering if someone could give me the size of the blower motor on a 120,000 BTU york furnace. I went to the house and wrote down the model # but somehow have misplaced it. It is probably about 15-20 years old. It had direct drive and I'm thinking 1/3 hp. 1740rpm. Any help would be appreciated. I'm an HVAC student and am helping a friend out.

  2. #2
    Join Date
    Nov 2000
    Location
    Eastern PA
    Posts
    68,946
    I have all of tha information needed but I don't know where I put it. You find the number and we can find the answer
    Government is a disease...
    ...masquerading as its own cure…
    Ecclesiastes 10:2 NIV


  3. #3
    Join Date
    May 2005
    Location
    toronto canada
    Posts
    25
    RoBo Teq is right its pretty hard to know when you don't have all the information.Given the size of the furnace it will most likely be a 1/2 or 3/4.You should find the model number because some of the york motors have the mounts spot welded to the motor itself and trying to install a generic motor with a belly band can be a pain in the ....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event