My wife and I are building a home this Spring. I have gotten quotes from several different HVAC installers. My question is, are we comparing apples to apples in these two units. Both of these quotes are without backhoe work...
The first one is a 1 Carrier 50YDV038_CB351 3 ton upflow 2 stage Water source heat pump with hot water return. 1 15kw heater. 1 flow control 1 pump, 1 hose kit and fittings, 1 sound pad, 1 programmable thermostat, lot supply and ductwork, lost supply and return air grilles and registers, plenums, 3 ton geo loop piping, misc material.
cost - $$$$$
Second one is a Climate Master TTV049AGC01ARKS Tran 27, 2 stage goe unit with media air filter, hot water gen, ecm blower motor, thermostat, 15kw heat strip, brass two pump flow controller, plastic hard pad, ground loop, ductwork, registers and grills.
cost - $$$$$$
This is all that was written on the quotes I recieved.
This will be for a 2000-2100 sq ft home in the midwest. I have plenty of land to do a horizontal loop.
$$$$$ dollars is quite a big difference so you can see my concern.