MIDDLEBY MARSHALL

[VTP99]

Anyone service their ovens ?

[Dad]

Anyone service their ovens ?

Yup

There are more of us in the equipment area. I'll move this thread.





.

[VTP99]

[QUOTE=Dad;10518452]Yup

There are more of us in the equipment area. I'll move this thread.


Thanks DAD !
Oh......and happy belated Father's Day.

[Dad]

What's up with the MM?

... and thanks

[totalcomfort]

I have a couple of their pizza ovens I clean and fix.Look tough when you first see them, but work just like any other oven.If you run into a old one that you can't find the conveyer motor for pm me I have found a cheap fix with a after market controler and motor.

[VTP99]

What's up with the MM?

... and thanks

Runs at one speed and it's the wrong one.
Model # PS-350G-2 ( Double stack pizza oven.)
I'm going to check the speed control & Hall Affects sensor.

[VTP99]

I have a couple of their pizza ovens I clean and fix.Look tough when you first see them, but work just like any other oven.If you run into a old one that you can't find the conveyer motor for pm me I have found a cheap fix with a after market controler and motor.

I tried to get into Middleby's tech info but was only able to get tech info on there 360 model. Owner replaced motor so who knows what's wrong now.

[Dad]

Runs at one speed and it's the wrong one.
Model # PS-350G-2 ( Double stack pizza oven.)
I'm going to check the speed control & Hall Affects sensor.

Chances are it's the sensor but they don't make the 350 sensor anymore, it's been discontinued. You'll need a new speed controller and sensor. $$$

[VTP99]

Chances are it's the sensor but they don't make the 350 sensor anymore, it's been discontinued. You'll need a new speed controller and sensor. $$$

Could you pass that on to my customer for me
I will be checking that sensor out better when I return there. Does the new sensor differ from the original one. 5v in & 2.5v out ?

Oh........and to answer your question on that other thread. I have had no problems with flood back on freezer TXV's set @ 4-6* superheat.

[Dad]

Could you pass that on to my customer for me
I will be checking that sensor out better when I return there. Does the new sensor differ from the original one. 5v in & 2.5v out ?

Oh........and to answer your question on that other thread. I have had no problems with flood back on freezer TXV's set @ 4-6* superheat.

Burrrrr... -10*. You keeping Ice Cream company?

Can't remember on the sensor. Sorry