Results 1 to 9 of 9
  1. #1
    Join Date
    Jan 2011
    Posts
    32

    York Gas valve spring located

    Installing a York furnace that my friend gave me model P1XUB12V05501D. It is a 2 stages variable speed. It was previous converted to propane and now I am converting it back to gas. I have the spring but could not find the regulator screw head anywhere. When second stage kick on all I got was 1.6" WC no matter how tight I tighten the allen key. Its need to be at 3.5"wc

  2. #2
    Join Date
    Feb 2009
    Location
    Fox Lake IL
    Posts
    461
    it takes more then the spring to convert it back.

  3. #3
    Join Date
    Jan 2011
    Posts
    32
    I change the orifices already back to #45 it were #56

  4. #4
    Join Date
    Feb 2009
    Location
    Fox Lake IL
    Posts
    461
    This is not a diy site and we can not help you with it. If you dont no where the screw is you should not be doing this.As not doing it right and get you hurt or burn down your house. call a pro in and get it set up right.

  5. #5
    Join Date
    Dec 2002
    Location
    SouthEast NC ICW & Piedmont Foothills
    Posts
    7,635
    why isn't your friend doing it for you?
    It`s better to be silent and thought the fool; than speak and remove all doubt.

  6. #6
    Join Date
    Jan 2011
    Posts
    32
    I am is an installer, I normally install Trane. I not familiar with this White Rodgers gas valve that is why I ask for help. Gas valve is a 36E54-250. If I am not an installer how do I know about Water Column and about changing the spring and orfice

  7. #7
    Join Date
    Dec 2002
    Location
    SouthEast NC ICW & Piedmont Foothills
    Posts
    7,635
    i used to work with this clown that had the vocabulary down,unfortunately that's all




    fwiw
    It`s better to be silent and thought the fool; than speak and remove all doubt.

  8. #8
    Join Date
    Jan 2011
    Posts
    32
    replaced with a 36E55 221 and working perfectly

  9. #9
    Join Date
    Jan 2004
    Location
    PA
    Posts
    68,790
    Quote Originally Posted by natra911 View Post
    If I am not an installer how do I know about Water Column and about changing the spring and orfice

    A couple searches on the internet, and I could sound like I know how to fly an airplane.

    An I'm not a pilot.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event