kennox tecks, need answers

[kowboy]

lennox, model no;-g2003e-75, inginition mogle no 97h0401.
which honeywell control will cross with this control? litter old lady cannot afford the oem part. any help will be appreciated

[tinknocker service tech]

lenox control is now a conversion kit to honeywell
with a 30 sec delay built in and is not advised to use any other control. cost is the same or some times less.
should not retofit any other control on a lenox unit
at same time i advise replace the damper door spring to

[kowboy]

i understand, just wanted to know if it was a crossed out there.

[markco]

Originally posted by tinknocker service tech
lenox control is now a conversion kit to honeywell
with a 30 sec delay built in and is not advised to use any other control. cost is the same or some times less.
should not retofit any other control on a lenox unit
at same time i advise replace the damper door spring to

I know that the 53L90 is the conversion kit, but the company I used to work for always installed the S8610U-1003 with no problems. Also, I think 53L90 has a 60 sec. prepurge delay.

[tinknocker service tech]

i have tried the s86 control in a few unit as a temp
found it is to quick to lite the burners off
if pressure switch or something shuts the burners down and right back on this control will lite the burners and pilot at the same time. this is why the lenox control has a built in 30 sec delay be fore liteing the pilot
cost for me is less then the s86 and i found that it can also be used with other contrlos to i like the delay good safty feathure