Results 1 to 4 of 4

Thread: ch530

  1. #1
    Join Date
    Dec 2005
    Location
    North America
    Posts
    254

    ch530

    Hello all
    I'm working on a retrofit ch 530 I am having issues binding. I was wondering if I can get someone to forward me a troubleshoot manual on this. I believe that the power supply board maybe damaged. There was a short on the communication bus.
    Thanks in advance

  2. #2
    Join Date
    Jun 2010
    Location
    Tampa, FL
    Posts
    101
    ch530 retros are't sold any more. Sure you don't have an adaptaview? If your com bus is shorted it will not communicate but it should not harm power supply board. If power bus shorts the on board fuse blows. Unplug all buss plugs at the power supply board. Do you have 24v on the output pins? With plugs off com should be up. Plug in one at a time until you loose com. That's the problem buss wire. Work your way up or down the wire disconnecting one at a time until you find the problem LLID. If it is the older flat wire buss have fun. The problem is often in a clamshell. Might be better to rewire with the newer bus with automotive connectors, although it would still need and adapter at each LLID. I don't think there is a troubleshoot manual. If you have access to tech support they can walk you through it.

  3. #3
    Join Date
    Jan 2005
    Posts
    605

  4. #4
    Join Date
    Jan 2009
    Location
    Not in Iran
    Posts
    1,107
    i have .,.,.,hehe
    no signature blast'em man blast'em
    !!!KILL THE TERRORIST!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event