Results 1 to 3 of 3
Thread: Ruud Furnace and Air Conditioner
-
04-25-2005, 10:40 AM #1
Professional Member
- Join Date
- Apr 2005
- Posts
- 25
I got a call for tommorrow. The customer told me the ruud 90/90 furnace and air conditioning unit run at the same time. He replaced the thermostat and it still does it. My thoughts are it has to be crossed wires or the board. Has anybody else ran into this? If so give me a heads up on what you think.
-
04-25-2005, 10:51 AM #2
Professional Member*
- Join Date
- Dec 2002
- Location
- Houston,Tx.
- Posts
- 14,910
Here's Your Sign said Bill EngvallOriginally posted by paoutlaw
He replaced the thermostat and it still does it.
“I am glad that I paid so little attention to good advice; had I abided by it I might have been saved from some of my most valuable mistakes.” - Edna St. Vincent Millay
The critic is a prisoner to his own experiences and perspectives, erroneously believing his limited experiences are the sum of all truth.
No Guns…No Freedom…Know Guns…Know Freedom.
-
04-25-2005, 10:52 AM #3
Professional Member
- Join Date
- Oct 2004
- Posts
- 3,399
I think he changed a part before he did any diagnosis.Originally posted by paoutlaw
I got a call for tommorrow. The customer told me the ruud 90/90 furnace and air conditioning unit run at the same time. He replaced the thermostat and it still does it. My thoughts are it has to be crossed wires or the board. Has anybody else ran into this? If so give me a heads up on what you think.
You will have to go look at it.
Be sure you charge him for the extra time it will take to "get it back to broke".
Fill out your profile, too.
Reply With Quote
