Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2002
    Location
    Hampton Roads, Virginia
    Posts
    1,735
    Anyone been to one yet? I'm going to the one in D.C. on Tuesday. Was it worth the time? Any tips on getting the most out of it?

    Thanks
    Kevin

    Here's a link to those who have not heard about it.
    http://www.buildingopensystems.com/us/program.php

    [Edited by klrogers on 04-24-2005 at 09:55 PM]
    The first rule of any technology used in a business is that automation applied to an efficient operation will magnify the efficiency. The second is that automation applied to an inefficient operation will magnify the inefficiency. - Bill Gates

  2. #2
    I went to the one in N.C.
    It is informative for the most part. By that I mean it was repetitious for me who already does LonWorks controls but my supervisor who is in management got more out of it than I did.
    If you have a building owner or consulting engineer who has some questions or concerns about this type of system then I would highly recommend that you bring them with you.
    Even if your customer could not get away for a whole day at least get them into the morning portion. It goes over the basics as to the benefits of LonWorks in a non-tecky business sense way.
    If I had it to do over again I would bring a consulting engineer and or a campus facilities manager. These are the people who will drive this home.
    Good luck and enjoy.
    scepter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365