Results 1 to 4 of 4
Thread: Inline bath fans
-
02-06-2011, 10:00 AM #1
Professional Member
- Join Date
- Jan 2009
- Location
- Indiana
- Posts
- 3,228
Inline bath fans
Has anyone have/installed a inline bath fan?
I am going to remodel a bathroom in the spring and see Burkhimer has started to carry these -
http://www.solerpalau-usa.com/res_bek.html
any reviews?
-
02-09-2011, 12:38 PM #2
Regular Guest
- Join Date
- Jun 2005
- Posts
- 28
Super quite
Be carefull with the mounting.
-
02-07-2013, 08:04 PM #3
Regular Guest
- Join Date
- Feb 2013
- Location
- New Jersey before and after Texas
- Posts
- 51
To keep a proper prescriptive standard of performance you should consider ashrae 62.2 & csa f326. As far as I understand most motors are UL tested without a load applied for a system with in a parabolic curve.
-
02-07-2013, 08:13 PM #4
Regular Guest
- Join Date
- Feb 2013
- Location
- New Jersey before and after Texas
- Posts
- 51
Runs exceeding the recommended lengths will only cause air to be ratified in a way that is objectionable to the desired volume. In other words, if you want a smooth delivery of design variables without under/over ventilating then matching the collar size isn't the best approach for your fart fan.
Last edited by Joseph'bidness; 02-07-2013 at 08:14 PM. Reason: Grammar
Reply With Quote