FHP Not heating

[Novak7669]

I went to a service call today for no heating. i get there and the water cooled unit was off on low pressure due to a tripped breaker on the well pump. so i reset the unit and get it back on line. i took pressure and temp readings this is what i got.

-58 degree supply water
-55 degree return air
-72 degree discharge air
-32psi on suction
-215psi on head

im not sure whats going on here but i did find oil at the joint that was sweated to the txv that someone replaced previous to me (it looked like crap) so im assuming that it is leaking. what should i do now? this was my first service call on my own btw im new to the field (about 10 months in)

[sparky05]

I went to a service call today for no heating. i get there and the water cooled unit was off on low pressure due to a tripped breaker on the well pump. so i reset the unit and get it back on line. i took pressure and temp readings this is what i got.

-58 degree supply water
-55 degree return air
-72 degree discharge air
-32psi on suction
-215psi on head

im not sure whats going on here but i did find oil at the joint that was sweated to the txv that someone replaced previous to me (it looked like crap) so im assuming that it is leaking. what should i do now? this was my first service call on my own btw im new to the field (about 10 months in)

First thing I would do is post this in the right section if you want any help with it, look under what heading you posted it to.

[Novak7669]

im new on here i just found out about this site yesterday. my friend told me this is a great site to learn from. i dont have many areas to post i was told i have to become a pro member..

[Chris_Worthington]

im new on here i just found out about this site yesterday. my friend told me this is a great site to learn from. i dont have many areas to post i was told i have to become a pro member..

There are open area's of the site located towards the bottom/ middle of the main page.

This current layout and the site for that matter is currently under a few changes. Please bear with us as we make these changes, It won't be long

I am going to relocate you're question/thread to another open area of the site, where you will receive some more exposure to you're question.

No worries, I will leave a redirect here for you to follow.

BTW, welcome and you're friend was correct. This site is an awesome tool for learning and sharing

Chris

[Novak7669]

alright! thanks alot chris. i really appreciate it! im going to be on this thing everyday putting up jobs i go on for opinions haha

[Chris_Worthington]

alright! thanks alot chris. i really appreciate it! im going to be on this thing everyday putting up jobs i go on for opinions haha

Your welcome and,,,,,

I forgot to tell you

Your sig line cannot contain links until you get to a pro status

[Novak7669]

ok sry about that! how can i go about getting a pro status?

[Chris_Worthington]

ok sry about that! how can i go about getting a pro status?

Take a peek here http://hvac-talk.com/vbb/showthread.php?t=733601 and here http://hvac-talk.com/vbb/showthread.php?t=703121

Greasing a few palms along the way never hurts either

[Novak7669]

haha im always greasing! im filling out this form. how long does it usually take to process??

[Chris_Worthington]

haha im always greasing! im filling out this form. how long does it usually take to process??

Check here and BE SURE TO READ RULE #1 http://hvac-talk.com/vbb/showthread.php?t=534272

[Novak7669]

WOOPSS!! lol good thing your guiding me through this site! sry that wont happen again!