Results 1 to 4 of 4
Thread: Airco Saver
02-04-2011, 10:46 AM #1New Guest
- Join Date
- Feb 2011
- Knoxville, TN
Anyone have any experience good or bad with a product called the AircoSaver? The theory of operation is: the device has a sensor-driven software algorithm that detects thermodynamic saturation of coils to switch the compressor off while fan still runs to maximize stored cooling capacity; once coils temperature rises (after short-cycle prevention time expires); compressor kicks back in. Touted as a potential 20-30% energy saving device for air conditioning.
02-04-2011, 10:52 AM #2
Hi and welcome.
What happens on design days when you need full capacity to keep up with the load?
Do you need to add a hard start kit?
02-04-2011, 11:57 AM #3
Welcome to HVAC-Talk
As stated in the header, this forum is primarily a welcome area and not for asking technical questions. Your question would be better posed in the Residential HVAC forum down the page a bit in The Arpa Zone section.
02-04-2011, 11:58 AM #4
Welcome to the site..
The statement below is my signature and just my overall feeling towards our industry and does not necessarily pertain to you nor this thread.
There really isn't a legitimate excuse for not doing the job correctly!