Results 1 to 4 of 4

Thread: A-Coil....

Hybrid View

  1. #1
    Join Date
    Jan 2005
    Adding on AC to a unit with a canvas connector in plenum. A-coil will fit in top section of plenum above canvas. Question is will plenum have enough strength to hold up A coil. I usually take 3" angle stock and build a shelve for coil. Hate to do all that and watch it fold. Anyone ever put A coil in canvas connector built plenum?

  2. #2
    Join Date
    Apr 2004
    Niantic, Illinois
    Me personaly, I would rebuild it in metal. When in doubt tear it out.

  3. #3
    Join Date
    Nov 2003
    South Carolina
    yea I would tear out the canvas on the bottom and transition the coil on top of unit then replace the canvas connector to top of a coil.

  4. #4
    Join Date
    Sep 2004
    I have never attached an A-coil to a flexible duct. Guaranteed, even if it supports it now, in no time the A-coil will sag somewhere and not drain properly.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365