Results 1 to 4 of 4
Thread: A-Coil....
-
04-12-2005, 08:07 AM #1
Regular Guest
- Join Date
- Jan 2005
- Posts
- 109
Adding on AC to a unit with a canvas connector in plenum. A-coil will fit in top section of plenum above canvas. Question is will plenum have enough strength to hold up A coil. I usually take 3" angle stock and build a shelve for coil. Hate to do all that and watch it fold. Anyone ever put A coil in canvas connector built plenum?
-
04-12-2005, 09:10 AM #2
Regular Guest
- Join Date
- Apr 2004
- Location
- Niantic, Illinois
- Posts
- 545
Me personaly, I would rebuild it in metal. When in doubt tear it out.
-
04-12-2005, 09:15 AM #3
Professional Member
- Join Date
- Nov 2003
- Location
- South Carolina
- Posts
- 1,161
yea I would tear out the canvas on the bottom and transition the coil on top of unit then replace the canvas connector to top of a coil.
-
04-12-2005, 12:48 PM #4
Regular Guest
- Join Date
- Sep 2004
- Posts
- 654
I have never attached an A-coil to a flexible duct. Guaranteed, even if it supports it now, in no time the A-coil will sag somewhere and not drain properly.
Reply With Quote