hey guys, around my area we back fill wells with cracker dust and a benseal plug 20 feet down except some municipalities that require grouting of the entire well in which we sub to the well driller. Its such a hassle filling a well that has standing water close to ground level say 5-10 feet. one shovel in and half of it back out with the water that overflows out the top and that sucks with a well 300 ft deep. What do some of you do with a situation like this? I've pumped the water down about 20 ft with a thrash pump which is a bit of a PITA so I'm looking for a better way.