Welcome to all New Guests going Pro? Do not post equipment questions in this forum

[Tlaloc289]

The internal temps is actually pretty vital, but I bet it's way below what is required. Some of these IT people really make me scratch my head. I bet if they checked the specs of their equipment, it does NOT call for 40* supply air... Less efficiency and less capacity.
I would guess you're either going to be cycling on setpoint pretty quickly and could cause thermal shock. Or you could start to trip low pressure/freezestats assuming these units have such protection.

I know that the internal temp is vital but they believe it is the only temp we should look at. and dont care about room temp. when the machines are going and the temps go up they panic and want to open the doors to allow the hot air to escape... after i told them all they were doing is letting the cold air out, they put a stop to that and are trying to figure other ways to let the hot air out.

This unit has Variable frequency drive fans so it the temps drop too low the outdoor fans will slow to about 4% of capacity.

And Yes my deadband is wild the Comp is set to start at a 10% load. When it does the temp drops 5* immediatly then idles and turns back on in 10 minutes. it overshoots the temp then starts the cycle over again.

[Novak7669]

Hey guys! I just got into the field almost a year ago. My uncle, which has been in this field for over 35 years, introduced this field to me. I grew up in florida and my career was in the yachting industry. When the economy took a big hit it was very hard to find work out there. So i moved up here in new york my uncle got me a job for the biggest hvac contractor of the tri state area (which im very thankful for). I came into the field not knowing anything at all about hvac. All i knew that an a/c blows cold and hot haha. it was very hard for me in the beginning to understand the field and i still have so much to learn. I know very little in this field now but more then what i did know about a year ago. I am very interested in this industry and hope that this site will help me out.

[supertek65]

why was link removed by mod?????????

was it a link to your union? or company?

Hey guys! I just got into the field almost a year ago. My uncle, which has been in this field for over 35 years, introduced this field to me. I grew up in florida and my career was in the yachting industry. When the economy took a big hit it was very hard to find work out there. So i moved up here in new york my uncle got me a job for the biggest hvac contractor of the tri state area (which im very thankful for). I came into the field not knowing anything at all about hvac. All i knew that an a/c blows cold and hot haha. it was very hard for me in the beginning to understand the field and i still have so much to learn. I know very little in this field now but more then what i did know about a year ago. I am very interested in this industry and hope that this site will help me out.

[Novak7669]

i was just told that i have to become a pro member to have that link. it was a link to the company i work for

[supertek65]

huh?

I guess that makes sence!!!!!!!!!!!!!

we get a lot of spammers and marketers!!!!!!!!!!!!

well hurry up and become a pro member so you can fly your colors!!!!!!!

i was just told that i have to become a pro member to have that link. it was a link to the company i work for

[Novak7669]

im trying man lol im not quite sure how to apply..??

[supertek65]

i am not sure but

i think you have to send Twilli $5????????????????

im trying man lol im not quite sure how to apply..??

[jpsmith1cm]

im trying man lol im not quite sure how to apply..??

http://hvac-talk.com/vbb/showthread.php?t=116113

Look there for Pro membership info.


It may take a little time to be approved, but the technical forums and the educational forums are worth it.

[Novak7669]

ok thank you guys! im filling out this form right now. hopefully i get approved. on this form it says: Requesting Access To; Professional Technical forum_____________ Business & Marketing Forum______________ i definately want to be on the technical forum but whats the business and marketing forum about??

[supertek65]

not sure?
but i think it is for the dummies in suits???????????

ok thank you guys! im filling out this form right now. hopefully i get approved. on this form it says: Requesting Access To; Professional Technical forum_____________ Business & Marketing Forum______________ i definately want to be on the technical forum but whats the business and marketing forum about??

[Novak7669]

haha im thinking it might be about people buying and selling parts, tools etc...

[Tech23]

ok thank you guys! im filling out this form right now. hopefully i get approved. on this form it says: Requesting Access To; Professional Technical forum_____________ Business & Marketing Forum______________ i definately want to be on the technical forum but whats the business and marketing forum about??

I think it is for owners, etc...those making the business decissions for a company.

[Novak7669]

i think your right i just read the rules and it seems like its only for business owners

[supertek65]

good morning Ted!!!!!!!!!!!

havent seen ya for a while!!!!!!!!!

[Tech23]

good morning Ted!!!!!!!!!!!

havent seen ya for a while!!!!!!!!!

Hey Frank..how have you been? I need to send you a Nice email don't I?

[supertek65]

yes!
I need a nice email!

Hey Frank..how have you been? I need to send you a Nice email don't I?

[Tech23]

yes!
I need a nice email!

Hey buddy, you've got mail...you are going to like her, I mean it!

[dgmtech280]

Business and Marketing may be about the specials going on at local distributors? As well as local rebates? Then again that would lead me to believe that it is for owners.

[AC-GIRL]

Hey buddy, you've got mail...you are going to like her, I mean it!

Is she is holding a pipe wrench?

[Tech23]

Is she is holding a pipe wrench?

No, but she was holding some "jugs" though.