Results 1 to 8 of 8
  1. #1
    Join Date
    Mar 2003
    Posts
    46
    Can anyone brainstorm and think of how changing a transformer for the t-stat in the air handler, changing a thermostat on the wall or changing a board in a compressor (all three have been done to my system) change the cooling in the farthest end of my house. Lennox system 3.5 ton heat pump, installed 2003, worked great. Had this work done Spring 2004 cuz transformer kept blowing in handler, and cooled differently afterward. (Ducts are good, no leaks per FPL.)
    Chipper

  2. #2
    Join Date
    Mar 2003
    Location
    North St Paul MN
    Posts
    858
    What was the reason given for the transformer blowing? (Usually, they don't just burn out without another problem)
    Is this system zoned?
    I'd rather have a bottle in front of me, than a frontal lobotomy.

  3. #3
    Join Date
    Mar 2003
    Posts
    46
    No system is not zoned. The circuit board in the compressor was the cause of the transformer to trip.
    Chip

  4. #4
    Join Date
    Mar 2003
    Location
    North St Paul MN
    Posts
    858
    Just read your other post. Please do not double post about the same problem. Your received alot of good information from the other post. Good luck.
    I'd rather have a bottle in front of me, than a frontal lobotomy.

  5. #5

    Post Information needed...

    What kind of system is this, model,serial would be helpful.
    AllTemp Heating & Cooling

  6. #6
    Join Date
    Mar 2003
    Posts
    46
    Sorry Markco, didn't know you couldn't repost. This was a little different question, more simple I thought.

    Lennox 3.5 ton H.P. Model CB30m-46-1P and HP26-042-12P

    Chip

  7. #7

    Hmm What he said...

    See other thread..................
    AllTemp Heating & Cooling

  8. #8
    Join Date
    Mar 2005
    Location
    Suppy NC
    Posts
    4,509
    go back to your first post and follow what is said there

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event