Results 1 to 6 of 6

Hybrid View

  1. #1
    Join Date
    Feb 2005
    Posts
    68
    Post Likes
    If you have fan on low just to to move the air and the ac or heat comes on, will it override low setting and go to medium or high if it needs to.

  2. #2
    Join Date
    Oct 2004
    Posts
    875
    Post Likes
    Yep

  3. #3
    Join Date
    Feb 2005
    Posts
    68
    Post Likes
    This thing just gets better and better

  4. #4
    Join Date
    Mar 2004
    Posts
    1,042
    Post Likes
    Will it override and go to medium or high as need be for your call for heat or cooling? No. It will go to exactly the right CFM needed for your call for heat, cooling, or dehumidification, complete with ramp up and ramp down and adjusting cooling CFM on the fly to get the right mix of sensible and latent.

    This Low, Medium, High thing is only there to simplify constant fan speed setting for the customer.

    And if you have it on constant fan, it will also suppress the fan for a few minutes (5?) after a call for cooling finishes to help the coil drip dry before you start blowing across it again. Once it's had a chance to dry out, the constant fan goes right back to your setting. You don't want that condensate going back into the air stream, after all

    All I can say is I've had it for seven months, and yes, it really does just keep getting better and better.

    [Edited by wyounger on 03-11-2005 at 04:12 PM]

  5. #5
    Join Date
    Mar 2004
    Location
    SE Michigan
    Posts
    20,695
    Post Likes
    That fan should be running continuously no matter what. Thats what its for.
    “Now the freaks are on television, the freaks are in the movies. And it’s no longer the sideshow, it’s the whole show. The colorful circus and the clowns and the elephants, for all intents and purposes, are gone, and we’re dealing only with the freaks.” - Jonathan Winters

  6. #6
    Join Date
    Feb 2005
    Posts
    68
    Post Likes

    coolwhip

    If fan should run continously, why doesn't it just revert back in low all the time with the option for med. and high?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365