Results 1 to 5 of 5

Thread: Info on Goodman

  1. #1
    Join Date
    Mar 2005
    Posts
    2
    Post Likes
    Any comments on a Goodman 100,000 btu furnace. Model GUPI100-4 probaly from the late 90'S. Problems etc?

    Thanks

  2. #2
    Join Date
    Aug 2003
    Posts
    523
    Post Likes
    IS IT RUNNING!!!!!!!!!!

  3. #3
    Join Date
    Mar 2005
    Posts
    2
    Post Likes
    Found at Surplus house, and thinking of installing,
    Haven't had any previous experience with Goodman.

    good ,bad, indifferent

    Thanks

    jbts

  4. #4
    Join Date
    Aug 2002
    Posts
    1,658
    Post Likes
    If it is previously used,,, it is not worth a penny in my book except the scrap metal worth..

    If it is NOS(new old stock),,, there are much better models on the market today and would not be worth as much as the models of today..

    Second, are you sure you need 100,000btu,, did you have a contractor do a proper load calculation... Make sure you find a contractor willing to install a customer supplied furnace before you buy one.. Most quality hvac contractors will not install a customer supplied unit and if they would you would not be saving any money and may have problems warranting parts(basically no parts warranty)..

    As stated many times before,, get a great contractor and go with the best system that you can afford from that contractor... Proper installation is the most important factor with any brand..

    Good luck
    J

  5. #5
    Join Date
    Aug 2003
    Posts
    1,841
    Post Likes
    Its ok but use it as your low line furnace.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Quality Home Comfort Awards