Originally Posted by
gpedens
Docjohn, my buddy finally bit the bullet and put a new Honeywell zone system in his house. He is willing to sell the parts. There are 5 dampers 14", three 12", and two 10", and a damper motor and board. There is an MS16 master Tstat with clock, and 4 slave stats and relay board. I repaired the relay board. As near as i can tell it all works. I have all the factory books/manuals on it. But please bare in mind I am not an HVAC tech. I hooked up the master stat and a slave and they would open and close the dampers. The clock on the master stat would ocassionally stop timing but would start back hen reset. The bypass stat or controller is still in his house as he didnt want a hole in the wall. But he just sold his house so he might be willing to let me take it out and patch the hole if you need a bypass controller.