Results 1 to 6 of 6

Thread: Heil furnace

Hybrid View

  1. #1
    Join Date
    Feb 2005
    Posts
    2

    Hmm

    I have a Heil furnace......when the target temperature is hit the furnace blower continues to run and does not shut off. I can even set the target temperature below the actual temperature and it still runs.
    What is going on with this thing?

  2. #2
    Join Date
    Mar 2004
    Location
    SE Michigan
    Posts
    17,995
    Make sure that the fan switch at the tstat is in the auto position. Other then that, you may have a bad relay, circuit board, or comb. fan/limit control and will need to patronize your local heating contractor.
    Behind the ostensible government sits enthroned an invisible government owing no allegiance and acknowledging no responsibility to the people.

    Theodore Roosevelt

  3. #3
    Join Date
    Sep 2002
    Posts
    496
    Doesnt shut off soon enough for YOU? or never shuts off?
    If I know I'm going Crazy,I must not be Insane

  4. #4
    Join Date
    Feb 2005
    Posts
    2

    Heil Furnace

    The blower will stay on always.......will not shut off unless I turn off power.
    I have checked the position of fan....it is in the auto position not the on position.

  5. #5
    Than you need to call for service.

  6. #6
    gasman Guest

    Smile

    either the relay switch stuck closed or the fan switch is stuck on fan/limit control.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event