Results 1 to 11 of 11

Thread: Best System

  1. #1
    Join Date
    Jun 2004
    Orange County California
    Wants to replace his system.
    He asked, what is the best system he can buy for his money?
    Isn’t looking for the most expensive system, but wants one that is very reliable and is willing to pay for it.
    I am stumped. Help!
    Any suggestions?

  2. #2
    Join Date
    Aug 2002
    Office and warehouse in both Crystal River & New Port Richey ,FL
    Carrier "Infinity", two speed outdoor unit,heat pump,or if gas with a two stage furnace.

    Follwed by other brands/models that can at least get close to it.

  3. #3
    Join Date
    Feb 2005
    I'll second that!

  4. #4
    Join Date
    Mar 2002
    Concord, CA
    The best system will be whatever the best contractor wants to put in. Tell your friend to worry about finding the best man. Then put in whatever machine he recommends. And if that contractor happens to like the furnace with integrated pressure gauge system (Infinity ), then so be it.

    Read this.

  5. #5
    Which ever system I choose to install today!

  6. #6
    Join Date
    Sep 2002
    Any system that is installed in a envelope that was design
    around the hvac system and the people living there.

  7. #7
    Join Date
    May 2000
    Indianapolis, IN, USA
    Where does he live?

    I'll go with dash if he lives in a steamy climate where dehumidification is a priority.

    In a cold climate, the Rheem/Ruud modulator blows away his beloved MVP in heating comfort.

  8. #8
    I always felt that all thigs being equal. Rheem\Ruud was the best bang for the buck.

  9. #9
    Join Date
    Apr 2002
    Rheem/Ruud 90% gas furnace is the best on the market IMHO.

    Their mods on the market for quite some time now are a light year beyond any two stage with VS motor.
    The way we build has a greater impact on our comfort, energy consumption and IAQ than any HVAC system we install.

  10. #10
    Join Date
    Mar 2002
    Richmond, Virginia
    I would doubt you need a gas furnace assuming it will be installed in southern California. There seems to be a 10° swing in design temps. between the urban and airport area there. Based on weather conditions in that area (east coaster here) I would likely opt for Lennox's HPXB15 (14SEER) with VS air handler as you aren't likely to recover the costs of a higher SEER system over it's life expectancy. Remember however this is the opinion of someone who has no experience sizing systems for the left coast. There are some members here from your area who have experience with the climate and suitable system selections there.
    There is nothing more frightful than ignorance in action....Mark Twain

  11. #11
    Join Date
    Feb 2005
    Just my opinion, but if I want the "best" system for the money I would look at a few things.

    1. reputation and track record of the company.
    2. annual cost of running the system (SEER).
    3. warranty, who has the longest factory warranty.

    I dont care too much for gas furnaces, they dry out the air too much, and in the South gas is just too dang expensive. We inatsll about 6 heat pumps to every 1 gas furnace.

    Will a load calc be done on the house? I just converted my parents from straight cool to heat pump, and went from 10 SEER to 12 SEER. After running a load calc, I was able to use a system that is a full ton smaller than what they had before.
    "If you can't fix it, don't break it."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365