Results 1 to 10 of 10

Thread: SEER rating?

  1. #1
    bdr is offline Regular Member - bad email address Contact Admin
    Join Date
    Dec 2004
    Location
    NY
    Posts
    45
    How can I determine, from looking at my condensors, what the SEER rating is?

  2. #2
    bdr is offline Regular Member - bad email address Contact Admin
    Join Date
    Dec 2004
    Location
    NY
    Posts
    45
    They are made by Comfortmaker.

  3. #3
    Join Date
    Apr 2004
    Posts
    7,680
    Depends...

    If you kow the serial number or at least the age you can make a guess. Then it depends on what indoor unit it is matched with. Odds are its a 10 SEER if its 14 years old or less.

  4. #4
    bdr is offline Regular Member - bad email address Contact Admin
    Join Date
    Dec 2004
    Location
    NY
    Posts
    45
    It is new, just installed. I believe the serial number is printed on the side of the unit with other information, but not the SEER. I just want to make sure that I got the 12 SEER unit I paid for. After the install the only literature I received was the install manual.

  5. #5
    Join Date
    May 2000
    Location
    Indianapolis, IN, USA
    Posts
    34,594
    What's the model #?

  6. #6
    Join Date
    Apr 2004
    Posts
    7,680
    You need the outdoor unit model number and the indoor unit and or coil model number. Outside of that if you just want to know the outdors inteded seer, look at the yellow energy guide, it shouldnt have been removed by the dealer. If you didnt have the indoor unit changed, then your guess is as good as ours as to what its rated or not rated as.

    [Edited by docholiday on 02-22-2005 at 12:51 PM]

  7. #7
    bdr is offline Regular Member - bad email address Contact Admin
    Join Date
    Dec 2004
    Location
    NY
    Posts
    45
    The yellow energy guide was removed by the contractor. That is why I want to verify what I received.

    The Model is:
    Soft Sound 1200+
    CAC224AKA5

  8. #8
    bdr is offline Regular Member - bad email address Contact Admin
    Join Date
    Dec 2004
    Location
    NY
    Posts
    45
    The indoor unit is an ADP hydro-air unit. Should I be looking for its SEER as well.

  9. #9
    bdr is offline Regular Member - bad email address Contact Admin
    Join Date
    Dec 2004
    Location
    NY
    Posts
    45
    I found the info on Confortmaker's website, it is a 12 SEER. Thanks for your help!

  10. #10
    Join Date
    Jan 2002
    Location
    Ft.Worth,Tx
    Posts
    4,584

    Post Look it up.

    Originally posted by bdr
    How can I determine, from looking at my condensors, what the SEER rating is?
    Model # Serial #
    http://www.ari.org

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event