Results 1 to 8 of 8
  1. #1
    Join Date
    Jan 2005
    Posts
    61
    i'm try ing to find out a tech support # as to why i can't seperate temps in two zones. all help appreciated.
    1 hp,2 evaps. heat 1 zone cool the other.
    thanks

  2. #2
    Join Date
    Nov 2001
    Posts
    1,874
    Call a local Sanyo distributor,
    Ask them for the Tech support #.

    Since most counter guys don't care about tech support,
    I'm sure they'll pass the # along just so they don't have to talk about something they know nothing about.
    If you try to fail, and succeed.
    Which have you done ?



  3. #3
    Join Date
    Nov 2001
    Posts
    1,874
    Wait a minute,

    Did you say your trying to heat 1 zone, at the same time another zone cools ?
    Both running at the same time with 1 condenser ?

    If you try to fail, and succeed.
    Which have you done ?



  4. #4
    Join Date
    Jan 2005
    Posts
    61
    yes toolpusher, the manual say's it won't work.
    sanyo say's it will. according to the website.
    i posted all the info earlier.

  5. #5
    Join Date
    Jan 2005
    Posts
    61
    a/h model kmh0922 x two units. condenser h/p
    model cmh1822. each indoor has it's own t-stat computer ?? wired in . is it a programming error?

  6. #6
    Join Date
    Nov 2001
    Posts
    1,874
    I wouldn't see how,
    Try your distributor.
    If you try to fail, and succeed.
    Which have you done ?



  7. #7
    That would take a lot of solenoids

  8. #8
    Join Date
    Feb 2005
    Posts
    38

    sanyo

    I think it should work most of the units I have seen have 2 compressors and 2 condencers all in 1 unit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event