Results 1 to 5 of 5
Thread: Simple TXV Question
02-03-2005, 05:12 PM #1
I have two Trane, cooling, non-bleed, single direction flow TXV valves:
Valve A is a TAYTXVA0E3C designed for 3 to 3.5 ton AC units
Valve B is a TAYTXVA0H3C designed for 5 to 6 ton AC units
Both valves have a 3/8 liquid line feed.
Question: I place the temperature sensor bulb of both valves in warm water so each valve is WIDE open. Each valve is being supplied with liquid R-22 from their respective design condensers at the same pressure.
Which valve will allow more R-22 to flow and why?