Results 1 to 5 of 5
Thread: hvac sequencers
-
02-01-2005, 07:26 PM #1
Regular Guest
- Join Date
- Jul 2004
- Posts
- 7
i have to change a thermo-disk-heat sequencer on my ruud unit
but i can not find one ,is someone can help me its a 4 switch m1-m2 m3-m4 m5-m6 do you known were i can look on the net to fine one with 3 switchs all connect on the same relay
tankyou
-
02-01-2005, 07:36 PM #2
Professional Member*
- Join Date
- Mar 2004
- Location
- Grottoes VA
- Posts
- 5,857
That is a Rheem/Ruud part and you can only get them from a Rheem/Ruud dealer. (The mount is different than everybody eles)
It is BTW, a 3 pole sequncer.Karst means cave. So, I search for caves.
-
02-01-2005, 07:41 PM #3
Member
- Join Date
- Jan 2005
- Posts
- 188
I would look under the yellow pages, heating companies. then look for a rudd dealer. But if none are listed then any qualified hvac company should be able to take care of your problem for you.
-
02-01-2005, 09:01 PM #4
Regular Guest
- Join Date
- Jun 2003
- Location
- GA
- Posts
- 395
HO's come here because they can't find "qualified" HVAC. But I'm sure the original poster appreciated your advice.Originally posted by 9mmnow
I would look under the yellow pages, heating companies. then look for a rudd dealer. But if none are listed then any qualified hvac company should be able to take care of your problem for you.
-
02-01-2005, 09:14 PM #5
Professional Member
- Join Date
- Sep 2001
- Location
- East Stroudsburg, PA
- Posts
- 13,212
Just a refresher course on
The HVAC-Talk.com FORUM RULES.
No DIY type questions allowed.
Reply With Quote
