Results 1 to 3 of 3


  1. #1
    Join Date
    Dec 2010
    Memphis, TN


    SEIBE MN-FLO3T VAV controller.

    The MicroNet VAV -Series is an application-specific, pre-programmed (user configurable) VAV terminal box controller with integral damper actuator and flow sensor. These controllers take standard zone sensor inputs as shown below and provide flow control. The two models are identical except the MN-FLO3T model provides 3 triac outputs for controlling reheat. MicroNet controllers reside an a sub-network to the secondary ASD Bus called the 'U' Bus, which is supervised by the MicroNet Integrator supervisory interface.

    Pulled from a working environment during an upgrade to a new BAS system install.

    There are some slight signs of use however the entire unit is functional

    Currently selling these Items for $75 or best offer. We have about 20 of them. We also have other novar controlers as well.

    Let me know if you are interested

    Aaron 901.634.9332

    Or email. Address in profile.

  2. #2


    what fireware version are the controlers.

  3. #3
    Join Date
    Oct 2011
    El Paso, Texas
    I need some. Mine are MN-FLO model only but I believe we can use 3T also..altough we have no reheat coils..
    Email Address Removed
    let me know!
    Last edited by Chris_Worthington; 10-14-2011 at 08:49 PM. Reason: Email Address Removed

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event