Results 1 to 3 of 3

Hybrid View

  1. #1

    Hmm

    I have a 7/8" OD line with a hard kink or crimp in it. How will this effect the system and efficiency?
    Thanks

  2. #2
    Join Date
    Jan 2004
    Location
    Burleson, Texas
    Posts
    1,741
    A compressor failure waiting to happen....not counting the capacity reduction...

  3. #3
    Join Date
    Oct 2004
    Posts
    3,400
    How will this effect the system and efficiency?
    What does a clogged artery do to life span and quality of life?

    Poor piping practices, in general, shorten the life of the equipment and lower the efficiency.

    It could do nearly nothing, but could keep it from working at all. Kinks & crimps are variable.

    If they could put in a smaller pipe and flow the same amount, I am pretty sure they would use a smaller one.

    You already know it isn't right.
    So, do the right thing.
    Have a local contractor, that you trust, take a look at it.
    If this is a new installation, get them back before the warranty expires.

    (By the way, DIY means "KICK ME" on this forum.)


    [Edited by bwal2 on 01-29-2005 at 11:32 PM]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event