Results 1 to 3 of 3
  1. 11-21-2010, 09:12 AM #1
    miez
    miez is offline New Guest
    Join Date
    Jul 2010
    Posts
    1

    heatilator direct vent

    having a problem with the flame lifting off the thermopile and going out. works fine when the glass is off as soon as i put it on 20 seconds later it starts at the first openings in the burner,right by the pilot. thought air intake right away pulled everything apart looks clear, short vent 1- 90 5' total length
    any suggestions?
    Reply With Quote Reply With Quote
  2. 11-21-2010, 02:18 PM #2
    SigGuy
    SigGuy is offline Professional Member
    Join Date
    Nov 2010
    Location
    Nevada
    Posts
    38
    Quote Originally Posted by miez View Post
    having a problem with the flame lifting off the thermopile and going out. works fine when the glass is off as soon as i put it on 20 seconds later it starts at the first openings in the burner,right by the pilot. thought air intake right away pulled everything apart looks clear, short vent 1- 90 5' total length
    any suggestions?
    Your exhaust and fresh air are mixing somewhere. Recheck all of your connections.

    SG
    Reply With Quote Reply With Quote
  3. 11-24-2010, 09:23 PM #3
    burning wood
    burning wood is offline Regular Guest
    Join Date
    Nov 2010
    Location
    ohio
    Posts
    10

    i am new here

    hello i just wanted to ad that sigguy is right , i actually had one doing that . i removed the termination cap and noticed the inner flue for the exhaust was not sealing properly leaving a gap causing the mixture. be sure the term is not clogging .
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules