Results 1 to 2 of 2
  1. 11-17-2010, 05:27 PM #1
    Trevorjh101
    Trevorjh101 is offline Regular Guest
    Join Date
    Nov 2010
    Location
    Thunder Bay On, Canada
    Posts
    18

    Maxitrol Amplifier Problems

    I am working on a MUA unit that uses the Maxitrol A1010A Amplifier for a Single Stage Main Valve. I had to replace the Venter motor due to the Proving swicth not Closing. Started Unit back up and everthing was good untill about 5 minutes of running the main burners, I noticed the A1010A Has a Capacitor on its board and it was Smoking Badly. However it did not fry the Board the unit still runs. My qusetion is does anyone know what that Capacitor is For, and why it might be Smoking and burning??
    Reply With Quote Reply With Quote
  2. 11-18-2010, 05:22 PM #2
    Trevorjh101
    Trevorjh101 is offline Regular Guest
    Join Date
    Nov 2010
    Location
    Thunder Bay On, Canada
    Posts
    18
    weird today i went back to the job site and did Resistence tests on everything and it was all good readings. I just Thought i would start up the Furance again to see what Happens, and weird thing is it worked great no smoking or burning anymore, Dont know what i did if anything but owell it works
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules