Anyone use Honeywell-Enalasys Diagnostics
Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2004
    Posts
    253
    Does anyone use the Honeywell-Enalasys duct and system analysis tools? They are suppose to be able to measure airflow through the ducts to verify the duct design as well as other system issues.

  2. #2
    Join Date
    Aug 2002
    Location
    Office and warehouse in both Crystal River & New Port Richey ,FL
    Posts
    18,836
    I've seen it demonstrated twice at actual homes,quicker than conventional methods ,but the results are the same.

  3. #3
    Join Date
    Aug 2002
    Location
    Office and warehouse in both Crystal River & New Port Richey ,FL
    Posts
    18,836
    Strange ,this post moved up to today,with a post from hvacbroker,but it's not there??

  4. #4
    Join Date
    Apr 2004
    Location
    Palmdale, CA
    Posts
    199
    I got the training for it and used it about 30 times. It is time consuming and takes a lot of room in the truck. Looks good and works well. You have to try it out to see if it's what you like. E-scan Honeywell certifies you to use this equipment but then out of every sale they get some kickback. Look into it. It may be something you want to do. They give a demo and some sort of trial basis while you try it.

  5. #5
    Join Date
    Mar 2003
    Location
    Avon Lake, OH
    Posts
    21
    It has some potential as a diagnostic tool. Very expensive though. You could purchase 5 sets of professional air balance tools for one set of the Honeywell test equipment.

    With the proper test equipment you would have no limitations on the type of equipment you can test, 100 ton, kitchen exhaust, MUA on the air side professional tools allow you test any type of system.

    The Honeywell tools do have limitations to them so do your research carefully.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event