Picked up a scratch and dent range hood/microwave combo at Slowes the other day and put the vent in today. The store display state you can get it installed for $xx.xx. What do you get for that I wonder?
They don't carry offsets in the store so they'd take a loss or do some creative duct in this case since the stove is on an inside wall, with obstructions going up into attic and outdoors.
Can't see it, but the hole in wall where wire comes through was patched before the unit installed to stop air infiltration
The hole in ceiling was also patched/sealed before the insulation reinstalled.
Discharge through wall so would not have to attach roof cap to standing seam tin roof
I've put 3-4 hours into the install including the wiring. Heavy duty duct for this case compared to the usual stuff at the box store, took not quite an hour using the plasma machine at work to fabricate.