Results 1 to 8 of 8
Thread: Wood to gas conversion?
-
09-29-2010, 10:20 AM #1
Professional Member
- Join Date
- Jul 2002
- Posts
- 45
Wood to gas conversion?
I am converting an existing wood fireplace to gas logs. My problem is getting the gas line into the fireplace.This is my first time doing this and I want to make sure everything is to code. There is a ash door in the bottom of the fireplace that goes into the crawlspace. Would it be ok to run the gas line thru the bottom? I was planning to notch or remove the door and seal the opening after I ran the line so draft in the fireplace would not be affected. Has anyone ever done this before?
"Don't tell lies,there's less to remember"
-
09-30-2010, 12:26 AM #2
Regular Guest
- Join Date
- May 2005
- Location
- Madison, WI
- Posts
- 1,078
That's how we do gas lines all the time.
Not sure why anyone would want a gas log though.
-
10-01-2010, 10:21 PM #3
Professional Member
- Join Date
- May 2010
- Location
- Bicknell, UT
- Posts
- 18
-
10-02-2010, 12:20 AM #4
Regular Guest
- Join Date
- Aug 2010
- Location
- Memphis
- Posts
- 343
What he said!
-
10-02-2010, 08:07 AM #5
Professional Member
- Join Date
- Jan 2009
- Location
- Indiana
- Posts
- 3,228
the previous owner of my house converted it from wood to gas...i am not looking to convert it back to wood
-
10-03-2010, 11:24 PM #6
Regular Guest
- Join Date
- May 2005
- Location
- Madison, WI
- Posts
- 1,078
ok....? Do you have a question, or did you reply to the wrong thread?
Originally Posted by yellowirenut
-
10-04-2010, 06:14 PM #7
Professional Member
- Join Date
- Jan 2009
- Location
- Indiana
- Posts
- 3,228
was drinking at the time..never mind Originally Posted by jtp10181
-
10-09-2010, 09:09 PM #8
Professional Member
- Join Date
- Jul 2006
- Location
- Virginia
- Posts
- 378
Drinking at 8am......NICE !!! LMAO Originally Posted by yellowirenut
was drinking at the time..never mind
Common sense is NOT common !!!
Reply With Quote
