Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2010
    Posts
    37

    CCOntrols BASRT-B Router

    Any one ever used sitebuilder to set up a Bacnet/IP
    from the comp to a BASRT-B Bacnet/IP to MSTP router
    BQT can see the mstp device fine, but modtest inside sitebuilder
    does not see even the router.

  2. #2
    Join Date
    Dec 2006
    Location
    What? Who? Where?
    Posts
    1,726
    If you mean modstat, this is a proprietary ALC function. Other BACnet devices do not support this function. I have used both the BASRT-B and BASRTP-B with success on ALC controllers using MSTP.

    kontrol out
    "Open is as open does." - Forrest Gump
    "Can't we all just get a Lon?" - Garry Jack
    "BACnet: integration or interrogation?" - The Janitor
    "Open protocols? You can't handle open protocols!" - Nathan R. Jessup
    “What’s that? Aaa… open protocols? Don’t talk about…. open protocols? Are you kidding me? Open protocols? I just hope we can hardwire an interface!” - Jim Mora http://www.youtube.com/watch?v=U7fjDS0jKiE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event