Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2010
    Post Likes

    Unhappy Am I over my head?

    I am trying to use the blower on an old Milwaukee-Thermoflow Model 1103 to push air for a second hand central air system I put in, the furnace is oil fired forced hot air, the cooling exchanger is all installed in the output plenum and I have the thermostat wires run to a Lux heating and cooling controller, the thermostat runs the heat but won't run the cool, I did notice the transformer puts out almost 29VAC the contactor in the compressor needs 24Vac and the compressor works because I tested it with a 24VAC plug in transformer, so what am I doing wrong I know it will work ?


  2. #2
    Join Date
    Apr 2010
    West Virginia
    Post Likes
    Seems you are,
    If you did all of that but can not find the reason you are getting now power to the condensing unit contactor, I do not see anyone being able to help you from remote locations.

    I can only suggest that you get a tech out, but, you may find that most people will not work on homemade, or bodged together equipment as there is no actual system and there is liability for home built equipment.


  3. #3
    Join Date
    Aug 2002
    Southold, NY
    Post Likes

  4. #4
    Join Date
    Sep 2002
    Northeast Ohio
    Post Likes
    Quote Originally Posted by pecmsg View Post

    No fair baiting........................................
    A good HVAC tech knows how, an educated HVAC tech knows why!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.