Page 4 of 12 FirstFirst 1234567891011 ... LastLast
Results 40 to 52 of 145
  1. #40
    ummmmmmm lets see now.....
    Hey cockroach, don't bug me! ©

    www.AskTheDiceman.com

    www.TheColdConspiracy.com

    www.Pennwood-HVAC.Com

    Bring Em Home....

  2. #41
    Originally posted by senior tech
    Whoaaaaaa nellie...I fixed mine, cost $5.00, but thank God there was only one screw and no left over parts.
    $5 for a six pack...putting the plug back in, priceless.
    Hey cockroach, don't bug me! ©

    www.AskTheDiceman.com

    www.TheColdConspiracy.com

    www.Pennwood-HVAC.Com

    Bring Em Home....

  3. #42
    Originally posted by Diceman
    Well that's what they get for making something simple like an Acme fan motor so complicated..anyway....if mine works out and ya want me to get you a new one let me know, either of you Dave or Julie or whoever else moves into your head in the meantime
    I'll wait until you've had time to evaluate the sonics of the new assembly. I have a feeling what they sent you will be of the same quality. The suspense is killing me.

  4. #43

    Talking

    It came today, what a complicated little gizmo that is, even got a temp probe on it, it is DC. I ordered the $4 blade too but it didn't arrive yet, not sure if I will pop it in now or wait for the blade......stay on the edge of your seat, I'll let ya know soonly.....promise.
    Hey cockroach, don't bug me! ©

    www.AskTheDiceman.com

    www.TheColdConspiracy.com

    www.Pennwood-HVAC.Com

    Bring Em Home....

  5. #44
    Join Date
    Sep 2001
    Location
    East Stroudsburg, PA
    Posts
    13,215
    Originally posted by Diceman
    It came today, what a complicated little gizmo that is, even got a temp probe on it, it is DC. I ordered the $4 blade too but it didn't arrive yet, not sure if I will pop it in now or wait for the blade......stay on the edge of your seat, I'll let ya know soonly.....promise.
    Dude, I'm dying to know how this turns out. Don't keep us in suspense.

  6. #45
    Join Date
    May 2001
    Location
    Bennington, Vermont U.S.A.
    Posts
    13,864
    We know how fond you are of these Edward. Do you think that perhaps you overloaded your freezer with them and this caused pressure in the rear..... of the freezer compartment?



    [Edited by benncool on 09-27-2004 at 06:20 PM]

  7. #46
    Join Date
    Jan 2004
    Location
    Earth
    Posts
    4,879
    Thats perfect benny. He has a little feta cheese on the side I'm sure.
    A Diamond is just a piece of coal, that made good under pressure!

  8. #47

    Talking

    Isn't Mr.Brain our new moderator?
    Hey cockroach, don't bug me! ©

    www.AskTheDiceman.com

    www.TheColdConspiracy.com

    www.Pennwood-HVAC.Com

    Bring Em Home....

  9. #48
    Originally posted by Diceman
    It came today, what a complicated little gizmo that is, even got a temp probe on it, it is DC. I ordered the $4 blade too but it didn't arrive yet, not sure if I will pop it in now or wait for the blade......stay on the edge of your seat, I'll let ya know soonly.....promise.
    My money says the $4 blade is the real problem. Maybe you could balance it before you install it.

  10. #49
    I say it's the motor....stay tuned....you 2.
    Hey cockroach, don't bug me! ©

    www.AskTheDiceman.com

    www.TheColdConspiracy.com

    www.Pennwood-HVAC.Com

    Bring Em Home....

  11. #50
    Oooo ooo! We got ourselves a bet!

  12. #51
    This is better than servivor!!!


  13. #52
    Ever since I got the motor the thing has been quiet, its just sitting there in the box.....I think I scared it.
    Hey cockroach, don't bug me! ©

    www.AskTheDiceman.com

    www.TheColdConspiracy.com

    www.Pennwood-HVAC.Com

    Bring Em Home....

Page 4 of 12 FirstFirst 1234567891011 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event