Thanks for putting this up, I downloaded the file and it looks like a pretty slick interface for setting up AEM's. Is there a way to upload the configuration that's already in an existing one to see what's in there by using this?
No you cannot upload existing configuration of an AEM.
But in that version all your AEM settings of all your jobs are stored in a database and you can even export AEM's config from your database and send that file to another user for him to import it into his own AEM Configuration tool database.
Help!! AEM Configuration tool 3.0
Hello I was using this AEM config tool version but the hard drive on my work laptop failed is there anyway i could download it again?
You can download it from here:
Originally Posted by rsouders
Has the AEM config tool been retooled for Windows 7 yet?
AEM Configuration tool for Win 7
Any update on the Win7 version of the AEM Configuration tool?
Originally Posted by martinsbt
Originally Posted by quadonice
Sorry to anyone for bumping such an old thread, since it may still be relevant to some.
Martin, any chance you could recompile the AEM Configuration Tool under Windows 7. I have been working on a new version to support Windows 7, 8.1 and 10. No sense in reinventing the wheel if its not needed.
But that tool doesn't support the new firmware in the 2100, does it?
I have both versions out in my truck, the old version 2100 configs fine, the new version won't.... But i'm also using (and have successfully used since the AEM's were introduced) an old laplink cable. I've never had the official Siemens AEM cable.
I resorted to using Hyperterminal - not too hard, the netmask is the only thing that isn't obvious.
Hello martinsbt, I have a need for the AEM Configuration tool that you wrote. Were you able to write a version that runs under windows 7? If so I would very much like and appreciate it if you would allow me to download it. Thank you
Originally Posted by katfeldmann
i just recompiled a new version of the AEM configuration tool that works also on windows 7. i will post the download link in this thread tomorrow morning.
Since i left Siemens few years ago, and dont have AEMs in hands anyore i cannot do any testing for the download portion, hope it will help someone
Download link to AEM Config tool 18.104.22.168 for all windows versions
here a link to download the new version
version is 22.214.171.124
it works with all versions of windows including windows 10.
You MUST uninstall previous versions of AEM config tool BEFORE installing that one.
you may want to backup your AEMtool.mdb file before uninstalling the previous version of the tool and then copy it back to the installation folder after installing 126.96.36.199
also, you must make sure you have .net framework 4.0 Full installed ont the PC
let me know if you have problems
Originally Posted by dingman
if they changed something in a newer version of the aem firmware, that will cause these errors. If you want me to look at it, just send me your c:\AEMConfig.log file after trying to download the aem2100