Results 1 to 2 of 2

Thread: turbocor tt500

  1. #1
    Join Date
    Sep 2008
    Location
    dania,fl
    Posts
    21

    turbocor tt500

    bearing calibration fails
    eeprom fault
    what to you think

  2. #2
    Join Date
    Dec 2005
    Location
    Melbourne, Australia
    Posts
    98
    You need to meter out the bearing sensors first, front & rear. If ok, check you have the latest software to re- calibrate the bearings.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event