Scottsman CM3

[sodadude]

This unit is about 2 years old. There is power to the unit and water is turned on but there is zero ice. I dont hear the machine doing anything.

Is there a reset or breaker? Where is it located?

I dont have time to dick around playing icemaker guy. I need to work on the beverage unit underneath.

[kool it man]

take a look through this service manual

http://www.scotsman-ice.com/support/...ED/306456m.pdf

[kool it man]

page 40 talks about reseting this model

[Diceman]

Icemakers require time an patience.
At least take off a panel and look around.

[rayr]

Originally posted by Diceman
Icemakers require time an patience.
At least take off a panel and look around.

LMAO

Hey Ed, ur old enough, ever hear the term Soda Jerk???? Was very common............

[sodadude]

Originally posted by Diceman
Icemakers require time an patience.
At least take off a panel and look around.

I am better than that. I dont have time to fill you in with all the silly details.

I knew when I mentioned dick, you would come out of the closet. Heh, heh.

[condenseddave]

Originally posted by sodadude

Originally posted by Diceman
Icemakers require time an patience.
At least take off a panel and look around.

I am better than that. I dont have time to fill you in with all the silly details.

I knew when I mentioned dick, you would come out of the closet. Heh, heh.

BWAHAHAHAAAAAAAAAAA.

Wrong thread, but nice shot.

[Diceman]

Tell them to call a real serviceman..

[condenseddave]

Originally posted by Diceman
Tell them to call a real serviceman..

LAMEOOOOOOOOOOOOOOOOOOOOOO.

Dickman.

[sodadude]

Originally posted by kool it man
page 40 talks about reseting this model

Thank you for your help, I appreciate it.

[iceplants]

Now that Was Funny, and I am not an old fart to laugh at that one! just 50, lol. hey, dont forget to fix what caused it too trip in the first place! or you will be going back until its fixed? did you forget about those , silly little details, huh dick?

[sodadude]

Originally posted by kool it man
page 40 talks about reseting this model

Thanks. We finally got around to repairing the soda machine and we pulled the front panel of the icemaker. Pushed the freeze button and away it went. Thanks again.

[Diceman]

Originally posted by sodadude

Originally posted by kool it man
page 40 talks about reseting this model

Thanks. We finally got around to repairing the soda machine and we pulled the front panel of the icemaker. Pushed the freeze button and away it went. Thanks again.

I think I told ya to do that a few months ago.
I guess that place don't use much ice.....

[R12rules]

It always helps when stuff is pluged in and the switch is turned to the ON position.



The manuals were free .... piece of cake. Pick one up or I can send you one.
No problemo....

[orland25]

hi friend ;do you reset the machine, in off bottom you do he reset.

[filterbuoy]

huh??