Page 4 of 5 FirstFirst 12345 LastLast
Results 40 to 52 of 58
  1. #40
    Join Date
    Sep 2004
    Posts
    33
    http://www.goodmanmfg.com/consumer/s...dSite=Goodman#

    Link to Goodman's 12 SEER unit. Click Product Specs. Scroll down to witness yourself that, depending on coil and furnace used, this so-called 12 SEER ranges from 11 to 13.

    If I come across a document regarding the testing for ratings, I will post that as well.

  2. #41
    Join Date
    Nov 2000
    Location
    Eastern PA
    Posts
    68,944
    Originally posted by thighway
    http://www.goodmanmfg.com/consumer/s...dSite=Goodman#

    Link to Goodman's 12 SEER unit. Click Product Specs. Scroll down to witness yourself that, depending on coil and furnace used, this so-called 12 SEER ranges from 11 to 13.

    If I come across a document regarding the testing for ratings, I will post that as well.
    This is not comparing apples to apples here. Please understand that I have inside knowledge on this one. It drives Goodman salespersons crazy that they cannot verify that adding a TXV or VS blower to certain systems will increase the efficiency even though everyone knows it must.
    Government is a disease...
    ...masquerading as its own cure…
    Ecclesiastes 10:2 NIV


  3. #42
    Join Date
    Sep 2004
    Posts
    33
    I don't see how this isn't comparing apples to apples. If you read the spec sheets, it clearly indicates where standard coils are used the SEER is lower, and where TXV / VS blowers are used the SEER is higher.

    I also have inside info, just so you know.

  4. #43
    Join Date
    Nov 2000
    Location
    Eastern PA
    Posts
    68,944
    Whatever the hell you want to believe thighman. If you want to believe that every capacity of a model of furnace has exactly the same round number rating, then you go right ahead and believe that.

    I tried to give you an out because you are new here. You would be better off to know who it is you are discussing with before making a fool of yourself.
    Government is a disease...
    ...masquerading as its own cure…
    Ecclesiastes 10:2 NIV


  5. #44
    Join Date
    Sep 2004
    Posts
    33
    It's t highway, not thighman...

    I'm not trying to make this a personal conflict, and you're right, I don't know who you are. Nor am I going to waste time looking into who you are before joining a discussion on this board. I also understand that furnaces do not carry the exact same to the decimal rating in all BTU ranges. I also understand that we have primarily been speaking about SEER to this point, which I have clearly indicated the truth regarding. If I make an untrue statement and am proven wrong....the beer's are on me!

    Just because I am new to this board means relatively nothing. I am becoming an active member of this website because I love this industry. You also do not know who I am, nor am I making a fool of myself.

  6. #45
    Join Date
    Aug 2002
    Location
    Office and warehouse in both Crystal River & New Port Richey ,FL
    Posts
    18,836
    Originally posted by thighway
    It's t highway, not thighman...

    I'm not trying to make this a personal conflict, and you're right, I don't know who you are. Nor am I going to waste time looking into who you are before joining a discussion on this board. I also understand that furnaces do not carry the exact same to the decimal rating in all BTU ranges. I also understand that we have primarily been speaking about SEER to this point, which I have clearly indicated the truth regarding. If I make an untrue statement and am proven wrong....the beer's are on me!

    Just because I am new to this board means relatively nothing. I am becoming an active member of this website because I love this industry. You also do not know who I am, nor am I making a fool of myself.

    Good Points!I think you are correct.

  7. #46
    Join Date
    Apr 2004
    Location
    Midwest
    Posts
    2,683
    Originally posted by RoBoTeq
    The first thing manufacture reps are taught is to stick to the script and never claim fault unless their is a bulletin stating so.


    ROFL!
    Live each day like it is your last, for one day you will be right!

  8. #47
    Join Date
    Apr 2004
    Location
    Midwest
    Posts
    2,683
    Originally posted by thighway
    It's t highway, not thighman...
    Your in Mississauga?

    My wife was born and raised there. Her Mom is still there, brother and family in Brampton.

    Due to make a trip there in a few months...
    Live each day like it is your last, for one day you will be right!

  9. #48
    Join Date
    Nov 2000
    Location
    Eastern PA
    Posts
    68,944
    "t" highway, my apologies for being so curt. I am used to people knowing my position which I am not actually allowed to advertize on Internet forums due to conflict of interest.

    Welcome aboard and let's not let this thread be an issue.

    Another little inside info "t" highway, dash will agree with anything to oppose me

    Settle in and get to know some of us a little better. The main thing we have in common is that we are all prima-donna HVAC enthusiasts.
    Government is a disease...
    ...masquerading as its own cure…
    Ecclesiastes 10:2 NIV


  10. #49
    Join Date
    Nov 2000
    Location
    Eastern PA
    Posts
    68,944
    Originally posted by thighway
    It's t highway, not thighman...

    You also do not know who I am
    RWD
    Government is a disease...
    ...masquerading as its own cure…
    Ecclesiastes 10:2 NIV


  11. #50
    Join Date
    Aug 2002
    Location
    Office and warehouse in both Crystal River & New Port Richey ,FL
    Posts
    18,836
    Originally posted by RoBoTeq
    "t" highway, my apologies for being so curt. I am used to people knowing my position which I am not actually allowed to advertize on Internet forums due to conflict of interest.

    Welcome aboard and let's not let this thread be an issue.

    Another little inside info "t" highway, dash will agree with anything to oppose me

    Settle in and get to know some of us a little better. The main thing we have in common is that we are all prima-donna HVAC enthusiasts.

    You are paranoid,he' right and that's all there is to it.

  12. #51
    Join Date
    Nov 2000
    Location
    Eastern PA
    Posts
    68,944
    Originally posted by dash
    Originally posted by RoBoTeq
    "t" highway, my apologies for being so curt. I am used to people knowing my position which I am not actually allowed to advertize on Internet forums due to conflict of interest.

    Welcome aboard and let's not let this thread be an issue.

    Another little inside info "t" highway, dash will agree with anything to oppose me

    Settle in and get to know some of us a little better. The main thing we have in common is that we are all prima-donna HVAC enthusiasts.

    You are paranoid,he' right and that's all there is to it.
    Who ya talking to dash?
    Government is a disease...
    ...masquerading as its own cure…
    Ecclesiastes 10:2 NIV


  13. #52
    Join Date
    Apr 2003
    Location
    Iowa
    Posts
    2,652
    You can't tell him who you are.............

    can I or someone else?
    There are 3 ways to do anything in life; Good, Fast, Slow: You can pick any 2.

Page 4 of 5 FirstFirst 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event