First off, you guys are a great help. Yesterday I replaced the TEV on this ice burg compressor,left it at factory setting for now, got the box down to +10, need at least ten more. Any way with a 90+ degree ambient and still hot shot, running 170 head, 103 degree liquid line temperature, suction 8# with 11 degree's at the evap. I know I was blasted for this type of capacity test before ,but at the liquid line reciever I front seated and the compressor pulled down to 18-20in and held.the moisture indicator flashes to mostly clear. do I need to close down on the TEV (Alco) to get a tad more super heat